Classic single seat Corbin Harley Davidson road king standard and classic 06-07

Seat only classic Corbin Harley Davidson road king standard and classic 06-07 designed to provide the maximum comfort of the pilot combined with an elegant and nostalgic look. Provides the use of our removable driver's backrest for more than 12 "vertical backrest Our sculpted seat position provides maximum body contact and offers true travel comfort with a bucket that provides much lower support. It offers an easier reach to the ground and a more ergonomic position on the bike.The Corbin Classic Solo is available in a standard model and a CLOSE model with seats closer to the bars with a narrower nose.

The removable driver's back of Corbin is simple to install and easily adjusts to your driving stance. Slide the backrest shaft and secure it with a single screw. Then you can set the position of the backrest according to your preferred configuration and lock it in place with the adjustment screw, it is not necessary to remove the saddle to do this operation.

For maximum passenger comfort, we offer a tourist-style rear seat for your Road King. The wide and sculpted seat position provides excellent support for the body with a wide contact area. This will eliminate hot spots and increase the comfort range of the passenger.

For a more vintage look, we offer a 50's style pad. This keeps a low profile and clean appearance on your bike. Developed with our exclusive Comfort Cell foam. It is screwed directly for a simple installation. It will also work together with your Harley-Davidson passenger backrest or trunk option if installed.

Both the standard model and the Close Solo model offer the option of electric heating for those cold mornings. The heating elements and the controller are integrated into the saddle with a switch conveniently located on the left side of the seat. Simply connect the included flexible cable to your HD fuse box and you're ready to start. Move the switch and the seat warms up and maintains the temperature automatically.

Choice of the Classic or Close model: the seat position of the Close model is approximately 1.5 "(3.81 cm.) Closer to the bars than the Classic Solo standard.There is a simple method to verify which one is right for you: Sit in Road King with the original seat and mark the rearmost position of your back with a piece of tape, then measure this position from the tank panel of your motorcycle.The position of the seat is only approximately 16 "(40.64 cm) .) of the board while the Standard model is 17.5 "(44.45 cm.) Remember, the seating position of a Corbin seat is quite different from that of a standard seat.

Seat only classic Corbin Harley Davidson road king standard and classic 06-07 has the following measures:

Classic Solo Seat: 11.5 "(29.21 cm.) Wide x 17.5" (44.45 cm.) Long

Seat close: 11.5 "(29.21 cm.) Wide x 16" (40.64 cm.) Long

Approx. Seat height: 27.5 "(69.85 cm.)

Touring rear seat: 12 "(30.48 cm.) Wide x 11" (27.94 cm.) Long

50's rear seat: 7.5 "(19.05 cm.) Wide x 10" (25.4 cm.) Long

Classic single seat Corbin Harley Davidson road king standard and classic 06-07

Seat only classic Corbin Harley Davidson road king standard and classic 06-07 designed to provide the maximum comfort of the pilot combined with an elegant and nostalgic look. Provides the use of our removable driver's backrest for more than 12 "vertical backrest Our sculpted seat position provides maximum body contact and offers true travel comfort with a bucket that provides much lower support. It offers an easier reach to the ground and a more ergonomic position on the bike.The Corbin Classic Solo is available in a standard model and a CLOSE model with seats closer to the bars with a narrower nose.

The removable driver's back of Corbin is simple to install and easily adjusts to your driving stance. Slide the backrest shaft and secure it with a single screw. Then you can set the position of the backrest according to your preferred configuration and lock it in place with the adjustment screw, it is not necessary to remove the saddle to do this operation.

For maximum passenger comfort, we offer a tourist-style rear seat for your Road King. The wide and sculpted seat position provides excellent support for the body with a wide contact area. This will eliminate hot spots and increase the comfort range of the passenger.

For a more vintage look, we offer a 50's style pad. This keeps a low profile and clean appearance on your bike. Developed with our exclusive Comfort Cell foam. It is screwed directly for a simple installation. It will also work together with your Harley-Davidson passenger backrest or trunk option if installed.

Both the standard model and the Close Solo model offer the option of electric heating for those cold mornings. The heating elements and the controller are integrated into the saddle with a switch conveniently located on the left side of the seat. Simply connect the included flexible cable to your HD fuse box and you're ready to start. Move the switch and the seat warms up and maintains the temperature automatically.

Choice of the Classic or Close model: the seat position of the Close model is approximately 1.5 "(3.81 cm.) Closer to the bars than the Classic Solo standard.There is a simple method to verify which one is right for you: Sit in Road King with the original seat and mark the rearmost position of your back with a piece of tape, then measure this position from the tank panel of your motorcycle.The position of the seat is only approximately 16 "(40.64 cm) .) of the board while the Standard model is 17.5 "(44.45 cm.) Remember, the seating position of a Corbin seat is quite different from that of a standard seat.

Seat only classic Corbin Harley Davidson road king standard and classic 06-07 has the following measures:

Classic Solo Seat: 11.5 "(29.21 cm.) Wide x 17.5" (44.45 cm.) Long

Seat close: 11.5 "(29.21 cm.) Wide x 16" (40.64 cm.) Long

Approx. Seat height: 27.5 "(69.85 cm.)

Touring rear seat: 12 "(30.48 cm.) Wide x 11" (27.94 cm.) Long

50's rear seat: 7.5 "(19.05 cm.) Wide x 10" (25.4 cm.) Long