BATTERY OPTIMIZER CHARGER LIFEPO4 OPTIMATE LITHIUM 4 X 0.8A
SKU. SPBK- 71075
LiFePO4 optimate lithium 4X08A battery optimizer charger for quality.
The optimate Lithium 4 X 0.8A battery charger is ideal for keeping several LiFePO4 batteries running.
This type of charger can charge up to 4 LiFePO4 batteries simultaneously, which allows you to optimize the performance and life of the battery. The Optimate "revives" rechargeable batteries with low voltages and offers extremely effective protection.
Functions:
- Detection of the state of charge.
- Relive excessively worn batteries.
- Basic load function.
- Check for internal damage to the battery.
- Voltage stability test.
- Slow charge mode.
Specifications:
- Recommended for LiFePO4 / LFP batteries up to 30Ah
- Control of the LiFePO4 program via microprocessor.
- Supply of AC 100-240V 50-60Hz, 0.23A with 100V, 0.15A with 240V
- Reverse drainage current less than 0.001A
- Output current (basic load) 0.8A
- Load time limit 48 hours (maintenance time: unlimited)
- Maintenance / test cycles 30 min / 30 min (alternately every hour)
- Load retention test, range: 10.1 - 13.2 V. OK (green) =
- Battery voltage 13.2 V
- Size 167 x 65 x 46 mm.
- Weight 0.4 kg (0.6 kg)
- Classification of the fully encapsulated housing (IP54), 4 wall mounting brackets
- Input cable length 2 m
- Output cable length 2 m
- Accessories included O-04 alligator clips / battery
- Operating temperature range -20 ° C / + 40 ° C
- Power consumption (without connected battery) 0.0089kWh / day
Nominal values / approvals, safety, EMC, energy efficiency, classification of housing protection
IP54, CE, NRTL (UL and CSA), SAA (AU and NZ), PSE (Japan)
Approved by TÜV Süd. BC (California Energy Compliant).
LiFePO4 optimate lithium 4X08A battery optimizer charger for LiFePO4 batteries that you should not miss.
New
LiFePO4 optimate lithium 4X08A battery optimizer charger for quality.
The optimate Lithium 4 X 0.8A battery charger is ideal for keeping several LiFePO4 batteries running.
This type of charger can charge up to 4 LiFePO4 batteries simultaneously, which allows you to optimize the performance and life of the battery. The Optimate "revives" rechargeable batteries with low voltages and offers extremely effective protection.
Functions:
- Detection of the state of charge.
- Relive excessively worn batteries.
- Basic load function.
- Check for internal damage to the battery.
- Voltage stability test.
- Slow charge mode.
Specifications:
- Recommended for LiFePO4 / LFP batteries up to 30Ah
- Control of the LiFePO4 program via microprocessor.
- Supply of AC 100-240V 50-60Hz, 0.23A with 100V, 0.15A with 240V
- Reverse drainage current less than 0.001A
- Output current (basic load) 0.8A
- Load time limit 48 hours (maintenance time: unlimited)
- Maintenance / test cycles 30 min / 30 min (alternately every hour)
- Load retention test, range: 10.1 - 13.2 V. OK (green) =
- Battery voltage 13.2 V
- Size 167 x 65 x 46 mm.
- Weight 0.4 kg (0.6 kg)
- Classification of the fully encapsulated housing (IP54), 4 wall mounting brackets
- Input cable length 2 m
- Output cable length 2 m
- Accessories included O-04 alligator clips / battery
- Operating temperature range -20 ° C / + 40 ° C
- Power consumption (without connected battery) 0.0089kWh / day
Nominal values / approvals, safety, EMC, energy efficiency, classification of housing protection
IP54, CE, NRTL (UL and CSA), SAA (AU and NZ), PSE (Japan)
Approved by TÜV Süd. BC (California Energy Compliant).
LiFePO4 optimate lithium 4X08A battery optimizer charger for LiFePO4 batteries that you should not miss.
LiFePO4 optimate lithium 4X08A battery optimizer charger for quality.
The optimate Lithium 4 X 0.8A battery charger is ideal for keeping several LiFePO4 batteries running.
This type of charger can charge up to 4 LiFePO4 batteries simultaneously, which allows you to optimize the performance and life of the battery. The Optimate "revives" rechargeable batteries with low voltages and offers extremely effective protection.
Functions:
- Detection of the state of charge.
- Relive excessively worn batteries.
- Basic load function.
- Check for internal damage to the battery.
- Voltage stability test.
- Slow charge mode.
Specifications:
- Recommended for LiFePO4 / LFP batteries up to 30Ah
- Control of the LiFePO4 program via microprocessor.
- Supply of AC 100-240V 50-60Hz, 0.23A with 100V, 0.15A with 240V
- Reverse drainage current less than 0.001A
- Output current (basic load) 0.8A
- Load time limit 48 hours (maintenance time: unlimited)
- Maintenance / test cycles 30 min / 30 min (alternately every hour)
- Load retention test, range: 10.1 - 13.2 V. OK (green) =
- Battery voltage 13.2 V
- Size 167 x 65 x 46 mm.
- Weight 0.4 kg (0.6 kg)
- Classification of the fully encapsulated housing (IP54), 4 wall mounting brackets
- Input cable length 2 m
- Output cable length 2 m
- Accessories included O-04 alligator clips / battery
- Operating temperature range -20 ° C / + 40 ° C
- Power consumption (without connected battery) 0.0089kWh / day
Nominal values / approvals, safety, EMC, energy efficiency, classification of housing protection
IP54, CE, NRTL (UL and CSA), SAA (AU and NZ), PSE (Japan)
Approved by TÜV Süd. BC (California Energy Compliant).
LiFePO4 optimate lithium 4X08A battery optimizer charger for LiFePO4 batteries that you should not miss.
