PORTAMATRÍCULAS KAWASAKI
ROUND LED M6 CHROME LICENSE LICENSE LIGHT APPROVED
Round license plate light with LED technology.It has an M6 mounting bolt.Measurement: Diameter: 13mm, Length: 16mmchrome finishAPPROVEDPrice by unit
HEINZ BIKES ALL-INN 2.0 LICENSE PLATE HOLDER WITH LIGHT & INDICATORS
3-in-1 license plate holder with LED license plate light and lights for turn signals, brake and tail position Frame made of billet aluminum Innovative surface mounted LED technology 140g lighter and 40% thinner than standard model The plate is very easy to install thanks to the new Slip Inn opening White LED License Plate Light LED elements with E marking (APPROVED) Allows replacement of turn signal/brake/tail lights and license plate lights License plate measurements (E): 220 mm W x 160 mm H This Heinz Bikes All inn license plate holder is the ideal option to clean the rear of your motorcycle.
UNIVERSAL ENROLLMENT HOLDER C-RACER NO3
Universal license plate holder c-racer NO3 Universal license plate holder c-racer NO3 with the following characteristics:Made of metal received with black powder paint Tilt adjustment Price by unit Includes space for the installation of the license plate, pilot, intermittent and catadiaoptricUniversal license plate holder c-racer NO3 perfect for adaptation in any fender
UNIVERSAL ENROLLMENT HOLDER C-RACER NO1
Universal license plate holder c-racer n01 Universal license plate holder c-racer n01 made of metal received with black powder paint Price by unit Perfect for license plate, pilot, intermittent and catadiaoptric installation Universal license plate holder c-racer n01 with tilt adjustment
REGISTRATION SCREWS
License plate screws License plate screws made of stainless steel Dimensions: M6 x 20 Description: stainless steel with powder coated heads, hexagonal Colors: 2 x black, 2 x blue, 4 x white Note: Although the powder coating is very resistant, you should use a clean, good quality wrench in new conditions Perfect license plate screws for the installation of any license plate
BLACK JACKER MACHINE LICENSE
Black license plate holder Jocker Machines Matrix holder black Jocker Machines simple but very resistant, license plate base plate that significantly improves the "careless" look of many bikes when mounted on the rear lights Manufactured as standard on aluminum plate 6061 T-6 1/8 "thick Single support plate sold alone for a more minimalist "vintage" look Available with an anodized black finish Compatible with 4 "(10.16 cm.) X 7" (17.78 cm.) License plates Made in the USA Black Joiner Machines license plate holder universal and adaptable to any motorcycle
LED ROUND LAMP LED ROUND APPROVED
Approved black round license plate light The black round LED license plate has the following dimensions: Diameter of the head: 13 mm, length: 48 mm(individual luminaire of 16 mm)• Dimensions of the support: Length: 70 mm, Width: 13 mm,Thickness: 2 mm• 3 holes, Ø 2x 4 mm, 6 mm The approved round black LED license plate light is original and functional
LIGHT BLACK LED LICENSE APPROVED
Approved black license plate light The uz approved black license plate has the following characteristics:Made of billet aluminum with chrome finish Five high intensity LEDs Measures approx .: 54 mm W x 22 mm H x 25 mm Pr Sale per unitIf you are looking for an approved black license plate light of small size and great intensity of light, this will be your best option
CHROME LICENSE LED LIGHT APPROVED
Approved chromed license plate light Approved chromed license plate light manufactured in billet aluminum with chrome finish With five unique high-intensity LEDs Measures approx .: 54 mm W x 22 mm H x 25 mm Pr Sale per unit You can now install this license plate chromed led light of small size and high intensity of light
CHROME "HALF MOON" LINCENSE PLATE LIGHT
"Half Moon" chromed license plate light.Approximate measurements: 12 cm largo X 3.5 cm alto X 3 cm fondoFinished in chrome.EC approved.12V, W5W.Price by unit.
UNIVERSAL SIDE BRACKET POLISHED ENROLLMENT
Side plate mounting bracket made of CNC aluminumValid for installation on 1 "Price by unitPerfect for transformations or adaptations to different types of motorcycles
UNIVERSAL SIDE BRACKET POLISHED ENROLLMENT 10 "
Valid for installation on 1 "Side plate mounting bracket made of CNC aluminumPrice by unitLength: 10 "(25.4 mm)A solution to adapt the license plate on the side of your bike
CHROME NITRO PORT LIGHT
Nitro chrome-plated model holder LED lightFeatures:Made of aluminum12V / 0.3W LEMeasures: 58 mm wide x 25 mm high x 30 mm deepColor: ChromeAPPROVEDPrice by unitOf small size and very little consumption, this registration light is ideal for transformations
NITRO BLACK LED HOMOLOGATED LED LIGHT
LED light for license plate holder hydra model blackFeatures:Made of aluminum12V / 0.3W LEMeasures: 58 mm wide x 25 mm high x 30 mm deepColor: WhiteAPPROVEDPrice by unitMade of aluminum and LED technology this Nitro holder light will reduce the size of the back of your bike
CHROME HYDRO CHROMED HOMOLOGATED LED LIGHT
LED light for hydra model homologated frame holderPerfect for transformations or simply to reduce the size of the original registration light Features:Made of aluminum12V / 0.3W LEMeasures: 58 mm wide x 25 mm high x 30 mm deepColor: ChromeAPPROVEDPrice by unitTo simplify the portamatriculas of your motorcycle or simply to change your license plate light for another of smaller size and less consumption this hydro license plate light manufactured in aluminum is the best option
HYDRO BLACK LED HOMOLOGATED LED LIGHT
Of aluminum termination and LED technology this license plate light black hydro has homologation Features:Made of aluminum12V / 0.3W LEMeasures: 58 mm wide x 25 mm high x 30 mm deepAPPROVEDTo simplify the portamatriculas of your motorcycle or simply to change your license plate light for another of smaller size and less consumption this hydro license plate light manufactured in aluminum is the best optionPrice by unit
LICENSE SKULL 7" X 4"
License skull made of aluminum from a mold made by hand and then polished.For standard matricuals 7 "x 4" (17.78 cm x 10.16 Cm)Finished in polished.Awesome this skull carrier to give a special touch to that area of the bike so bland.
LED NUMBER PLATE LIGHT BLACK
License plate light black Highway Hawk. M6 mounting. 12 mm D - 15 mm. E-Mark. 1 PC. Amazing license plate light black led.
LED NUMBER PLATE LIGHT CHROME
License plate light chorme led. M6 mounting. 12 mm D - 15 mm. E-Mark. 1 PC. Amazing license plate light chorme led.
LED LICENSE PLATE LIGHT APPROVEED
reduced design4 LED 12V / 0.6 WVery flexible and with 3M adhesive for proper installation.Dimensions: 13.5mm x 61mm x 5mmIt includes wiringAPPROVEED
UNIVERSAL LED license plate KELLERMANN KL1
PORTAMATRICULAS UNIVERSAL LED KELLERMANN KL1 Portamatriculas con luz LED, que también permite ser montado directamente sobre la placa de matrícula. El tamaño compacto y nuevo diseño hacen que el portamatriculas KL 1 se instale en cualquier tipo de motocicleta. La placa de matricula se ilumina de manera uniforme con luz blanca (CRI 80). El KL 1 y su soporte pueden montarse en el soporte de la matrícula o en la placa de matricula usando las tiras de montaje suministradas. También puede utilizar su propio soporte en lugar del que se suministra. Las dimensiones del soporte de montaje requerido son (HxWxD) aprox. 3 x 9 x 6 mm. Caracteristicas: Micro-diseño Aprobado para montar directamente encima de la placa de matrícula Iluminación completa de la matrícula 12 V / 1 W Dimesnions de la luz (H x W x D) aprox. 10 x 14 x 31 mm Luz blanca pura (CRI 80) Carcasa de metal de alta calidad. Adecuado para sistemas eléctricos 12 V. HOMOLOGADO Precio por unidad.
Portamatriculas UNIVERSAL BLACK SMOOTH
PORTAMATRICULAS UNIVERSAL NEGRO LISO Fabricado en metal con un diseño elegante y sencillo. Portamatriculas universal que incluye dos juntas de goma para subir o bajar el ángulo de instalacion del portamatriculas. Es adaptable a la mayoria de los guardabarros del mercado. Precio por unidad.
Portamatriculas UNIVERSAL BLACK PYRAMID
PORTAMATRICULAS UNIVERSAL PIRAMIDE NEGROEs adaptable a la mayoria de los guardabarros del mercado. Portamatriculas universal que incluye dos juntas de goma para subir o bajar el ángulo de instalacion del portamatriculas. Fabricado en metal con un diseño en la parte trasera en forma de piramide. Precio por unidad.
Portamatriculas UNIVERSAL CHROME PYRAMID
PORTAMATRICULAS UNIVERSAL PIRAMIDE CROMADOPortamatriculas universal que incluye dos juntas de goma para subir o bajar el ángulo de instalacion del portamatriculas. Es adaptable a la mayoria de los guardabarros del mercado. Fabricado en metal con un diseño en la parte trasera en forma de piramide.Precio por unidad.
ROUND LED LIGHT M8 plate holder CHROME
LUZ PORTAMATRICULA LED REDONDA M8 CROMADO Luz para matriculas redonda con tecnología LED. Dispone de perno de montaje M8. Medida: Diametro, 12 mm x Longitud, 17 mm Acabado en cromadoPrecio por unidad
QUADRO BLACK LIGHT LED number plate APPROVED
LUZ PORTAMATRICULA LED QUADRO NEGRO HOMOLOGADA Espectacular luz de portamatriculas con tecnología LED. Carcasa de aluminio mecanizado al CNC anonizado en negro. Medidas: Largo, 46 mm x Alto, 17.5 mm x Profundidad, 21 mm Forma triangular. HOMOLOGADO E Precio por unidad
QUADRO LIGHT LED number plate APPROVED
LUZ PORTAMATRICULA LED QUADRO HOMOLOGADA Espectacular luz de portamatriculas con tecnología LED. Forma triangular. HOMOLOGADO E Precio por unidad
KURZ SIDE KAWASAKI plate holder (various models)
PORTAMATRICULA LATERAL KURZ KAWASAKI (VARIOS MODELOS) Acero inoxidable pulido Ideal para combinar con nuestras luces de matricula. Fabricado en Alemania. Valido para los modelos KAWASAKI: VN1500 Mean Streak (2002-2003) VN1600 Classic (2003-2008) VN1600 Mean Streak (2004-2008) Solo se incluye el soporte, portamatriculas y piloto se vende por separado. Nota: Articulo para transformaciones. No admite devolución.
KURZ SIDE KAWASAKI VN900 plate holder 06-UP
PORTAMATRICULA LATERAL KURZ KAWASAKI VN900 06-UP Acero inoxidable pulido Ideal para combinar con nuestras luces de matricula. Fabricado en Alemania. Valido para los modelos KAWASAKI VN900 06-UP Solo se incluye el soporte, portamatriculas y piloto se vende por separado. Nota: Articulo para transformaciones. No admite devolución.
KURZ plate holder SIDE KAWASAKI VN800
PORTAMATRICULA LATERAL KURZ KAWASAKI VN800 Acero inoxidable pulido Ideal para combinar con nuestras luces de matricula. Fabricado en Alemania. Valido para los modelos KAWASAKI VN800 Solo se incluye el soporte, portamatriculas y piloto se vende por separado. Nota: Articulo para transformaciones. No admite devolución.
