List of products by manufacturer MOTOGADGET
SPEEDOMETER CONNECTOR MOTOGADGET MOTOSCOPE HARLEY DAVIDSON 04-11
Motogadget MO.CAN speedometer connector for instrument control and indicator lights.The M-CAN connector connects to the Speedo Motoscope and fits directly into the OBD (Data Link Interface/On-Board Diagnostic Port) socket, typically used to read trouble codes on 04-11 HD models with a 3 pin connector. pins.It will not trigger any trouble codes.Note: Not compatible with CAN-bus (HD-lan) models.Only speed, RPM and trouble codes will be fed.
3 IN 1 INDICATOR CHROME APPROVED MOTOGADGET TENS3
Indicator with 3 functions (Indicator, taillight and brake light)Measures: 11mm long x 11mm diameter casing. Overall length with 29mm M8 threaded stud. Wiring length approx. 110cm. Weight with wire approx. 20 grams.Characteristics: Made of high quality aluminum. For threaded mounting, with M8 thread. High quality chrome finish. ECE approval as brake, indicator and pilot light. The LEDs used offer the highest light output available by using the latest LED technology. Power consumption is 1 watt each.Price by unit.
INDICATOR 3 IN 1 BLACK APPROVED MOTOGADGET TENS3
Indicator with 3 functions (Indicator, taillight and brake light)Characteristics: Made of high quality aluminum. For threaded mounting, with M8 thread. ECE approval as brake, indicator and pilot light. The LEDs used offer the highest light output available by using the latest LED technology. Power consumption is 1 watt each.Measures: 11mm long x 11mm diameter casing. Overall length with 29mm M8 threaded stud. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Price by unit.
MOTOGADGET TENS2 APPROVED CHROME PILOT AND BRAKE LIGHT
Very small Motogadget pilot and brake light.Characteristics: Made of high quality aluminum. For threaded mounting, with M8 thread. Chrome finish. ECE homologation for both pilot and brake light. The LEDs used offer the highest light output available by using the latest LED technology. Power consumption is 1 watt each.Measures: 11mm long x 11mm diameter casing. Overall length with 29mm M8 threaded stud. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Price by unit.
BLACK PILOT AND BRAKE LIGHT APPROVED MOTOGADGET TENS2
Very small Motogadget pilot and brake light.Characteristics: Made of high quality aluminum. For threaded mounting, with M8 thread. ECE homologation for both pilot and brake light. The LEDs used offer the highest light output available by using the latest LED technology. Power consumption is 1 watt each.Measures: 11mm long x 11mm diameter casing. Overall length with 29mm M8 threaded stud. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Price by unit.
MOTOGADGET TENS1 APPROVED CHROME INDICATOR
Top quality mo.blaze Tens1 turn signal.Characteristics: Made of high quality aluminum. Chrome finish. For use of front and rear indicators. For threaded mounting, with M8 thread. ECE approval The LEDs used offer the highest light output available by using the latest LED technology. Power consumption is 1 watt each.Measures: 11mm long x 11mm diameter casing. Overall length with 29mm M8 threaded stud. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Price by unit.
BLACK INDICATOR APPROVED MOTOGADGET TENS1
Mo.blaze Tens1 turn signal for use with front and rear turn signals.Characteristics: Made of high quality aluminum. For threaded mounting, with M8 thread. ECE approval The LEDs used offer the highest light output available by using the latest LED technology. Power consumption is 1 watt each.Measures: 11mm long x 11mm diameter casing. Overall length with 29mm M8 threaded stud. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Price by unit.
MIRROR MOTOGADGET VIEW CLASSIC BLACK
Mirror Motogadget view classic black Motogadget now exclusively presents its series of mirrors without glass view. Surface of the mirror, which is worked directly on the metal of the body. Aluminum itself is the surface of the mirror. A design without weight. Without edge and frame the body of the mirror becomes very thin and light. Convex mirror surface. Valid for both the right and the left. Resistant to oxidation, corrosion and scratches through a complex process of plasma coating in vacuum. The precise kneecap allows a comfortable and very stable adjustment of the mirror. The Motogadget view classic black mirror has the following dimensions: Diameter of the mirror body: 96 mm.Thickness of the mirror body without ball head: 4.2 mm.Stem length: 150 mm. Stem and 1 x screw with M10x1.5, 1 x screw M10x1.25 left, 1 x screw M10x1.25 right, manual Price by unit Approved If you are looking for quality and design the mirror Motogadget view classic black will be a good choice
MOTOGADGET M-BLAZE EDGE LEFT DARK CHROMED TURN SIGNAL
Flashing 3-1 M-Blaze Edge dark chrome left made by Motogadget.Can be used as flashing, rear position light and brake light.Made of aluminum with dark chrome finish.12V / 3W.Approximate measurements:- Length 92mm- Height 20mmECE APPROVEDPrice by unit.Changing the look of your bike is very easy thanks to these m-Blaze Edge multifunctionals.
MOTOGADGET M-BLAZE EDGE RIGHT CHROMED TURN SIGNAL
Flashing 3-1 M-Blaze Edge chrome right made by Motogadget.Possibility of use as flashing, rear position light and brake light.Motogadget's state-of-the-art TranzLight® and IntensiLED® LED technology.Made of aluminum with chrome finish.12V / 3W.Approximate measurements: 92mm length and 12mm height.Thread of 19mm M8.It has ECE homologation.Price by unit.Motogadget M-blaze Edge multi-function chrome blades perfect for personalizing your bike quickly and easily.
MOTOGADGET M-BLAZE EDGE LEFT CHROMED TURN SIGNAL
Flashing 3-1 M-Blaze Edge chrome left made by Motogadget.It operates as an indicator light, rear position light and brake light.Made of chromed aluminum.12V / 3W.It measures 16 mm in diameter and 19.5 mm in length.Thread of 19mm M8.Cable and nut included.APPROVEDPrice by unit.Change the look of your motorcycle with these quick and simple motogadget M-blaze Edge chrome flashers.
INTERMITTENT LED HANDLEBAR M-BLAZE DISC ANODIZED ALUMINUM
Transparent discs with TranzLight-Technology technology that provide a harmonious and clean finish to the handlebarsWith the high intensity LED technology of Motogadget (IntensiLED)Made of scratch-resistant plastic with a compact aluminum basePolished anodized finishSale per unitFlashing high quality and brightness
MOTOGADGET MTS SPEEDSTER BLACK
A very compact instrument that measures the speed digitally, with exact analogical indication thanks to a stepper motor. This intelligent technology allows a classic look without compromises, since the sphere lacks a screen notch and an LC screen. A diameter of only 49 mm and a depth of installation of 24 mm allow a wide variety of mounting possibilities. The perfect solution for minimalists.Black backgroundMeasurements: depth: 24 mmDiameter: 49 mmcharacteristicsKm / h and mph are adjusted in the configuration menu100% water and vibration resistant The bowls and supports are available as an accessory.The sphere is illuminated by white LED lights.The small LED screen is only visible during the service. The intensity of the LED system adapts automatically to the lighting conditions.Operation via the menu button or the flash warning light on the handlebar.Assembly by means of two sockets with M3 thread on the back.Easy connection and calibration via odometer sensor, cable, plug and detailed instructions in German or English.Compatibility with almost all original odometer sensors.Functions:Indication of analog speed 0-200 km / h or mphSpeed indication alpha-numeric 200-999 km / h or mphClockIndication of total and partial mileageIndicators LED indicator control, long light, neutral, warning lightPrice by unitThe perfect odometer for your transformationsA very compact instrument that measures the speed digitally, with exact analogical indication thanks to a stepper motor. This intelligent technology allows a classic look without compromises, since the sphere lacks a screen notch and an LC screen. A diamétro of only 49 mm and a depth of installation of 24 mm allow a big variety of possibilities of setting. The perfect solution for minimalists.characteristicsElectronic speedometer »mst Speedster« by motogadget, black, bottom: 24 mm, Ø 49 mm, 12 V, with Reed sensor, with the national approval of Germany, Germany, gross weight: 220 gA very compact instrument that measures the speed digitally, with exact analogical indication thanks to a stepper motor and an indicator. This intelligent technology allows a classic look without compromises, since the sphere lacks a screen notch and an LC screen. A diamétro of only 49 mm and a depth of installation of 24 mm allow a big variety of possibilities of setting. The perfect solution for minimalists.characteristicsKm / h and mph are adjusted in the configuration menu100% water and vibration resistant The bowls and supports are available as an accessory.The sphere is illuminated by white LED lights.The small LED screen is only visible during the service. The intensity of the LED system adapts automatically to the lighting conditions.Operation via the menu button or the flash warning light on the handlebar.Assembly by means of two sockets with M3 thread on the back.Easy connection and calibration via odometer sensor, cable, plug and detailed instructions in German or English.Compatibility with almost all original odometer sensors.Functions:Indication of analog speed 0-200 km / h or mphSpeed indication alpha-numeric 200-999 km / h or mphClockIndication of total and partial mileageIndicators LED indicator control, long light, neutral, warning light
MOTOGADGET BAR GRIP M-GRIP SOFT RUBBER 1"
1 "grips manufactured by Motogadget M-grip model.Valid for 1 "handlebars (25.4mm)It has 35mm of outer diameter and 123mm of width.The cuffs are open at the ends to put counterweights, flashers or mirrors.Made of rubberNote: the mirrors or blinkers that appear in the photographs are not included.These Motogadget M-Grip grips are soft, more insulated and economical.
MOTOGADGET BAR GRIP M-GRIP SOFT RUBBER
22mm cuffs manufactured by Motogadget model M-grip.Valid for handlebars of 22 mm.35mm outer diameter and 123mm wide.The cuffs are open at the endsMade of rubber Note: the mirrors or blinkers that appear in the photographs are not included.These Motogadget M-Grip grips are soft, more insulated and economical.
FLASHING POLISHED motogadget M-BLAZE pin
Flashing polished m-blaze manufactured by Motogadget.One of the most important features of this flashing light is that the light is emitted at an angle of almost 180 °, making it visible from the front, rear and side.12 V / 3 WIt measures 16 mm in diameter and 19.5 mm in length.Thread of 19mm M8.Cable and nut includedAPPROVEDPrice by unit.Made of polished aluminum.Change the look of your bike with these motogadget M-blaze polished pin indicators.
FLASHING BLACK motogadget M-BLAZE pin
Flashing black m-blaze manufactured by Motogadget.One of the most important features of this flashing light is that the light is emitted at an angle of almost 180 °, making it visible from the front, rear and side.12 V / 3 WIt measures 16 mm in diameter and 19.5 mm in length.Thread of 19mm M8.Cable and nut includedAPPROVEDPrice by unit.Made of black aluminum.Change the look of your bike with these motogadget M-blaze black pin indicators.
FLASHING LED HANDLE M-BLAZE CHROME CONE
Flashing led handle M-Blaze chrome coneM.Blaze Cone flashers incorporate a clear LED lens into a compact mount that literally fuses with the end of your handlebars. They are virtually invisible when off, especially with m-Grip or similar fists.In motogadget they have equipped it with the system called TranzLight-Technology, in which the transparent cone projects a good light in all directions. This has become possible thanks to the application of CAD technology and LEDs that are pure works of art.APPROVEDThey are homologated as front indicators. The rubber supports allow the mounting on handlebars of 14 to 21 mm in diameter.Measurements: length: 53 mm, Ø 35 mmLens: clear, 12 V, 3 W, with LED, with 1 mt connection cables Price by unit
FLASHING LED HANDLE M-BLAZE BLACK ANODIZED CONE
Flashing led handle M-Blaze Black anodized coneM.Blaze Cone flashers incorporate a clear LED lens into a compact mount that literally fuses with the end of your handlebars. They are virtually invisible when off, especially with m-Grip or similar fists.In motogadget they have equipped it with the system called TranzLight-Technology, in which the transparent cone projects a good light in all directions. This has become possible thanks to the application of CAD technology and LEDs that are pure works of art.APPROVEDThey are homologated as front indicators. The rubber supports allow the mounting on handlebars of 14 to 21 mm in diameter.Measurements: length: 53 mm, Ø 35 mmLens: clear, 12 V, 3 W, with LED, with 1 mt connection cables Price by unit
THERE COVERS TURRETS CUENTAKILOMETROS MINI BLACK MOTOSCOPE 1 " HARLEY DAVIDSON
Harley Davidson covers Turrets Cuentakilometros Mini Metoscope Black 1" With these tops of turrets you can install the Mini Metoscope on the same handlebar, leaving a clean and minimalist lookValid only for mini motoscope odometer models that you can see by clicking HERE.Odometer not includedMade of high quality aluminum alloy.Valid for original H-D turretsIt has five LED indicators.Black aluminum finish
THERE COVERS TURRETS CUENTAKILOMETROS MINI POLISHED MOTOSCOPE 1 " HARLEY DAVIDSON
![abrazadera-cuentakilometros-mini-motoscope-manillar-22mm-negro]()
![abrazadera-cuentakilometros-mini-motoscope-manillar-22mm-negro]()
Ref. 930174Harley Davidson covers Turrets Cuentakilometros Mini Metoscope Polished 1 " Now you can install a small odometer with these tops of turrets that will make your motorcycle a unique vehicleValid only for mini motoscope odometer models that you can see by clicking HERE.Odometer not includedMade of high quality aluminum alloy.Valid for original H-D turretsIt has five LED indicators.Finished in polished aluminum
Digital Adapter M-CAN CUENTAKILOMETROS motogadget
ADAPTADOR DIGITAL M-CAN CUENTAKILOMETROS MOTOGADGET Adaptador digital para conectar fácilmente instrumentos Motogadget a la interfaz OBD (On-Board Diagnosis) directamenteDirectamente lee los datos como la velocidad del vehículo, la velocidad del motor y MIL (luz indicadora de mal funcionamiento) del bus de datos del vehículo por HDYa no es necesario montar y conectar los sensores de velocidad del vehículo y la velocidad del motorResistente a las vibraciones y los efectos del climaElectrónica protegida contra picos de tensiónSólo tiene que conectarCumple con todas las especificaciones SAEMedidas 38 mm L x 19 mm W x 13 mm H Precio por unidad. Nota. La aplicación no es posible en modelos Softails 2011, Dyna 2012, Sportster año 2014 en adelante. Además, no es posible con todos los otros modelos con sistema HD-LAN. Se adapta sólo modelos con sistema SAE J1850.
M-SWITCH SWITCH BUTTON POLISHED / STAINLESS 1 "
INTERRUPTOR PULSADOR M-SWITCH POLISHED/STAINLESS 1" Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
M-SWITCH SWITCH BUTTON POLISHED / STAINLESS 22MM
INTERRUPTOR PULSADOR M-SWITCH POLISHED/STAINLESS 22MM Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
M-SWITCH SWITCH BUTTON POLISHED / BLACK 22MM
INTERRUPTOR PULSADOR M-SWITCH POLISHED/BLACK 22MM Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
M-SWITCH SWITCH BUTTON POLISHED / BLACK 1 "
INTERRUPTOR PULSADOR M-SWITCH POLISHED/BLACK 1" Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
M-SWITCH BUTTON SWITCH BLACK / STAINLESS 1 "
INTERRUPTOR PULSADOR M-SWITCH BLACK/STAINLESS 1" Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
M-SWITCH BUTTON SWITCH BLACK / STAINLESS 22 MM
INTERRUPTOR PULSADOR M-SWITCH BLACK/STAINLESS 22 MM Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
M-SWITCH BUTTON SWITCH BLACK 22 MM
INTERRUPTOR PULSADOR M-SWITCH BLACK 22 MM Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
SWITCH BUTTON SWITCH BLACK M-1 "
INTERRUPTOR PULSADOR M-SWITCH BLACK 1" Carcasa fabricada en aluminio con dos micro interruptores de pulsador. Disponible para manillares de 1 "y 22 mm. Precio por unidad.
