ACCESORIOS PARA MOTOS KYMCO
MOTOGADGET M-BLAZE EDGE LEFT CHROMED TURN SIGNAL
Flashing 3-1 M-Blaze Edge chrome left made by Motogadget.It operates as an indicator light, rear position light and brake light.Made of chromed aluminum.12V / 3W.It measures 16 mm in diameter and 19.5 mm in length.Thread of 19mm M8.Cable and nut included.APPROVEDPrice by unit.Change the look of your motorcycle with these quick and simple motogadget M-blaze Edge chrome flashers.
KOSO DB-03 RACING COCKPIT
Multifunction electronic marker manufactured by Koso.This dial includes speedometer, odometer, travel counter, tachometer, temperature gauge, voltmeter, fuel gauge plus a gearshift indicator.With type approval for Germany.It has five levels of brightness, in a selection of blue, orange and light pink.Characteristics: Speedometer: With display range from 0 - 360 km / h (0 - 225 mph, units: km / h or mph and a reaction time less than 0.5 seconds. Odometer: Display range of 0 - 99999 km (miles), automatic restart after 99999 km (miles) with unit: 100 m. Travel counter: display range: 0 - 999.9 km (miles), automatic restart after 999.9 km (miles). Hour Meter: Display Range: 0 - 99999 hours. Travel hours counter: Display range: 0.0 - 999.9 hours with unit: 0.1 hour. Tire circumference: Adjustment range: 300 mm - 2500 mm Tachometer: Display range: 0 - 10000/0 - 12000/0 - 15000 rpm Unit: 10000 rpm - each level corresponds to 166 rpm, 12000 rpm - each level corresponds to 200 rpm, 15000 rpm - each level corresponds to 250 rpm. Red, yellow Rpm Setting range: 1000 - 15000 rpm Light switch: Adjustment unit: 100 rpm with warning light on (F-OFF) flashing (F-ON) Max. speed achieved Display range: 0 - 10000/0 - 12000/0 - 15000 rpm. Rpm 0.5, 1 - 6 input signal number settings Rpm input: HI (CDI), Lo (contacts). Unit Temperature: Unit: ° C or ° F Thermometer: Display Range: 0.0 - 250.0 ° C (32.0 - 482.0 ° F) Unit: 0.1 ° C (° F) Temperature warning: Setting range: 60 - 250 ° C (140 - 482 ° F) (Water temperature): 1 ° C (° F) Maximum temperature setting range: 0 - 250 ° C (32 - 482 ° F) ° F) Fuel level: Display range: 6 levels. Unit: each level corresponds to 16.6% Clock: 24 hours Voltmeter: Display range: DC 8 V - 18 V. Warning as soon as the voltage drops below 11.5 V or rises above 15.5 V Brightness: Setting range: 1-5 (dark); 5-5 (bright) Effective Voltage: DC 12V Effective temperature range: -10 ° C - + 60 ° C (14 ° F - + 140 ° F)Measurements: 120 mm wide, 68.5 mm high and 44.1 mm deep.Passive Speed Sensor: BF019005The range of the gear indicator is: N, 1, 2, 3, 4, 5, 6, 7, 8, 9Note: Installation requires expert knowledge of vehicle electricity
INTERMITTENT LED HANDLEBAR M-BLAZE DISC ANODIZED ALUMINUM
Transparent discs with TranzLight-Technology technology that provide a harmonious and clean finish to the handlebarsWith the high intensity LED technology of Motogadget (IntensiLED)Made of scratch-resistant plastic with a compact aluminum basePolished anodized finishSale per unitFlashing high quality and brightness
REAR FENDER TXT 1100/230 MM
Rear fender made of high quality steel, especially its great thickness and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Arc length 1100 mm. Width 230 mm.No doubt if you are looking to give a radical twist to your motorcycle this piece will be one that has to be present.
REAR FENDER TXT 1100/200 MM
Large fenders that will give your motorcycle a great robustness made by TXT.Its thickness stands out above any feature and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Arc length 1100 mm. Width 200 mm.No doubt if you are looking to give a radical twist to your motorcycle this piece will be one that has to be present.
REAR FENDER TXT 700/270 MM
Spectacular rear mount fenders of great dimension in both thickness and length. Made by TXT with top quality materials to be welded.Its thickness stands out above any feature and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Bow length 700 mm. Width 270 mm.With this type of fender you will have in your motorcycle the robustness that you looked for since you will give him much width in the back part.
TORX CHROME SCREW 8/32 "X 3/8"
Screw made of chrome steelTorx HeadThread: 8/32 "x 3/8"Price per kit of 5 units
REAR FENDER TXT 700/230 MM
Wide rear mudguard perfect for customizing your motorcycle. Manufactured by TXT known for the manufacture of this type of accessories.Its thickness stands out above any feature and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Bow length 700 mm. Width 230 mm.With this type of fender you will have in your motorcycle the robustness that you looked for since you will give him much width in the back part.
REAR FENDER TXT 700/200 MM
TXT rear fender made of high quality steel with great finish and perfect to customize.Its thickness stands out above any feature and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Bow length 700 mm. Width 200 mm.With this type of fender you will have in your motorcycle the robustness that you looked for since you will give him much width in the back part.
REAR FENDER TXT 560/270 MM
High quality rear fender manufactured by TXT of great thickness and finished in the rough.Its thickness stands out above any feature and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Arc length 560 mm. (Includes a back weld on the metal sheet of refurzo) Width 270 mm.With this type of fender you will have in your motorcycle the robustness that you looked for since you will give him much width in the back part.
REAR FENDER TXT 560/230 MM
High Quality Rear Fender made by TXTIts thickness stands out above any feature and is that it has solid walls of 2.2 mm - 3 mm thick to facilitate welding.These fenders are preheated.Unpainted rough finish.Measurements: Arc length 560 mm. (Includes a back weld on the metal sheet of refurzo) Width 230 mm.Completely change the aesthetics of the rear of your motorcycle thanks to these mudguards.
REAR FENDER TXT 560/200 MM
Large TXT rear fender made of high quality unpainted steelThese mud guards are preheated and have solid walls 2.2 mm - 3 mm thick to facilitate welding.Unpainted rough finish.Measurements: Arc length 560 mm. (Includes a back weld on the metal sheet of refurzo) Width 200 mm.Completely change the aesthetics of the rear of your motorcycle thanks to these mudguards.
RED SLIM CATADIAOPTRIC HOMOLOGADO
Adhesive Center MountingDimensions: approx. 122 X 15MMApprovedPrice by unitNecessary to circulate by road this catadiaoptrico will adapt to the perfection in your support of enrollment
BLACK AND CHROME SKELETON INTERMITTENT
Black and chrome finishMade of cast aluminum of high quality and durabilityMounting with mounting bolt M8-1.25 x 20 mmMeasure: 113.5mm long x 35mm wideEach flashing light contains 18 LEd of high luminosityAmber light with LED technologyApprovedPrice per coupleIntermittents with LED technology and a stunning aesthetic
CHROME AND BLACK LED SKELETON INTERMITTENT
Each flashing light contains 18 LEd of high luminosityMounting with mounting bolt M8-1.25 x 20 mmMeasure: 113.5mm long x 35mm widePrice per coupleAmber light with LED technologyApprovedChrome and black finishMade of cast aluminum of high quality and durabilityIntermientes of great quality and excellent luminosity
BLACK SKELETON LED FLASHLIGHTS
Approved skeleton flashers offering a combination of style and functionalityEach flashing light contains 18 LEd of high luminosityAmber light with LED technologyApprovedBlack finishMade of cast aluminum of high quality and durabilityMounting with mounting bolt M8-1.25 x 20 mmMeasure: 113.5mm long x 35mm widePrice per coupleTo match our Skeler mirrors, these indicators will not go unnoticed
CATADIÓPTRICOS ROJOS HARLEY DAVIDSON 92-17
Red catadiaoptricos setValid for left or right sideIt can be installed in bars of forks, rigid saddlebags, fenders, etc ...Valid for H-D models 92-17Sold by pairsReplaces original red catadiaoptrics
AIRFLOW HAN HARLEY-DAVIDSON
These Harley-Davidson grips combine a traction-grip crosshatch rubber surface with a comfortable 1.6-inch diameter. It is amazing how they adapt to the weather for a wet or dry weather. Its easy assembly and disassembly will avoid the risk of unnecessary scratches. If you care more about a good performance and functionality these are your fists
LEATHER SISSY BAR BAGS
Its high quality molded leather construction maintains its shape and is a convenient place to store quick access items. It has a locking fastener to ensure a perfect fit. Fits most Harley-Davidson bikes.
BLACK STRAP DEFENSE CLAMP 1 1/4 "
Fabricada del aluminio billet 6061-T6 Terminación en negro Venta por parejas Valida para las defrensas de motor con diametro 1-1/4"( 3.17 cm) Para las defensas negras, estas estriberas permitiran la instalacion de estriberas
CHROME STRAP DEFENSE CLAMP 1 1/4 "
Valid for 1-1 / 4 "(3.17 cm) diameter engine defrensesMade of aluminum billet 6061-T6High quality chrome finishSale by pairsYou can now install the fender footpegs with these high quality chrome clamps
BRONZE DOUBLE SWITCH BOX 25.4MM
Switch housing kit made of solid luminaire of high quality and small size.Double button.Bronze finish.Valid for 1 "(25.4 mm) handlebarsPerfect this box of switches to carry the controls with a simple gesture.
SADDLEBAG WALL ORGANIZER
It has a rigid backrest that easily adapts to the wall of the saddlebag Kit includes left and right organizer. It's time to put order with the new Harley-Davidson ALFORJA ORGANIZING COVER
FAIRING CAFE CAFER VINTAGE
Made of ABSAll models are served unpainted.Measures dimensioned in the images of the product.Do not include hardwareDesigned and manufactured by C-Racer
SADDLEBAG GUARD BAG WITH WATER BOTTLE HOLDER, RIGHT SIDE
Fits on the right side of your bike Sturdy synthetic leather with a hook and loop closure Zipped inner pocket specifically designed for the storage of sunglasses, wallets and mobile phones Includes a removable water bottle with Bar & Shield chart With this leather bag to keep bottle easily accessible you will be fully equipped on your motorcycle.
MESSENGER ARMY BLACK BAG
Soft and flexible material includes a padded shoulder strap.Hook finIncludes convenient carrying handleHDMC newspaper pocket, side pocket, and graphicInner water resistantIncludes pocket for tablets and devicesRubber port for easy headphone connection
UNIVERSAL REAR FENDER CAFE RACER N6
Made of ABSDesigned for models with 17 or 18 "All models are served unpainted.Measures dimensioned in the images of the product.Manufactured by C-Racer
UNIVERSAL SIDE BRACKET POLISHED ENROLLMENT
Side plate mounting bracket made of CNC aluminumValid for installation on 1 "Price by unitPerfect for transformations or adaptations to different types of motorcycles
MESSENGER ARMY BROWN BAG
Soft and flexible material includes a padded shoulder strap.Hook finIncludes convenient carrying handleHDMC newspaper pocket, side pocket, and graphicInner water resistantIncludes pocket for tablets and devicesRubber port for easy headphone connection
UNIVERSAL SIDE BRACKET POLISHED ENROLLMENT 10 "
Valid for installation on 1 "Side plate mounting bracket made of CNC aluminumPrice by unitLength: 10 "(25.4 mm)A solution to adapt the license plate on the side of your bike
