ACCESORIOS PARA MOTOS KAWASAKI
NEUMATIC SHINKO E270 SUPER CLASSIC 4.00H 19 61H WHITE BAND
The Shinko E270 has an H rating for speeds up to 130 mph (210KM / H)It can be used as a front and rear tire and must be used with air chambersThe Shinko E270 tire has a saw-tooth design that gives the tire a classic lookFeatures a nominal four-pleated nylon housing for extended useMeasure 4.00H 19 61HIt has white bandPrice by unitA classic tire that will change the look of your bike
PNEUMATIC SHINKO E270 SUPER CLASSIC 4.00H 19 61H
Measure 4.00H 19 61HPrice by unitThe Shinko E270 has an H rating for speeds up to 130 mph (210KM / H)It can be used as a front and rear tire and must be used with air chambersThe Shinko E270 tire has a saw-tooth design that gives the tire a classic lookFeatures a nominal four-pleated nylon housing for extended usePerfect for transformations or simply substitution
HEADLIGHT CONNECTOR FOR H4 BULBS
Universal connector for headlights with H4 bulbPrice by unitA terminal of great quality and durabilityReplacement or replacementValid for all central headlights with H4 bulbs
NEUMATIC SHINKO E270 SUPER CLASSIC 4.50H 18 70H WHITE BAND
Measure 4.50H 18 70HIt has white bandPrice by unitThe Shinko E270 has an S rating for speeds up to 118MPH (180KM / H)It can be used as a front and rear tire and must be used with air chambersThe Shinko E270 tire has a saw-tooth design that gives the tire a classic lookFeatures a nominal four-pleated nylon housing for extended useWhite band for a classic cut tire
NEUMATIC SHINKO E270 SUPER CLASSIC 4.50H 18 70H
Features a nominal four-pleated nylon housing for extended useThe Shinko E270 has an H rating for speeds up to 130 mph (210KM / H)It can be used as a front and rear tire and must be used with air chambersThe Shinko E270 tire has a saw-tooth design that gives the tire a classic lookMeasure 4.50H 18 70HPrice by unitGreat performance for a classic style tire
NEUMATIC SHINKO E270 SUPER CLASSIC 4.00H 18 64H
The Shinko E270 has an H rating for speeds up to 130 mph (210KM / H)The Shinko E270 tire has a saw-tooth design that gives the tire a classic lookFeatures a nominal four-pleated nylon housing for extended useIt can be used as a front and rear tire and must be used with air chambersMeasure 4.00H 18 64HPrice by unitClassical style tire and modern compounds
NEUMATIC SHINKO E270 SUPER CLASSIC 5.00S 16 69S TWO WHITE BANDS
It can be used as a front and rear tire and must be used with air chambersFeatures a nominal four-pleated nylon housing for extended useMeasure 5.00 S 16 69SIt has two white bandsThe Shinko E270 has an S rating for speeds up to 118MPH (180KM / H)Price by unitThe Shinko E270 tire has a saw-tooth design that gives the tire a classic lookWith two side white strips this classic cut tire will not go unnoticed
NEUMATIC SHINKO E270 SUPER CLASSIC 5.00S 16 69S WHITE BAND
The Shinko E270 has an S rating for speeds up to 118MPH (180KM / H)It can be used as a front and rear tire and must be used with air chambersMeasure 5.00 S 16 69SIt has white bandPrice by unitThe Shinko E270 tire has a saw-tooth design that gives the tire a classic lookFeatures a nominal four-pleated nylon housing for extended usePerfect tire for restorations or transformations
NEUMATIC SHINKO E270 SUPER CLASSIC 5.00S 16 72H
El neumatico Shinko E270 tiene una diseño en dientes de sierra que da al neumático una apariencia de estilo clásica Dispone con una carcasa de nylon nominal de cuatro pliegues para un uso prolongado El Shinko E270 tiene una clasificación S para velocidades de hasta 118MPH (180KM/H) Se puede utilizar como neumatico delantero y trasero y se debe utilizar con cámaras de aire Medida 5.00 S 16 72H Precio por unidad Uno de los neumaticos de estilo clascico mas demandados
NEUMATIC SHINKO E240 CLASSIC MT90 H 16 74H TWO WHITE BANDS
It has H classification for speeds up to 130 mph (210 km / h)Tube style tires should be used with air chambersMeasurement MT90 H 16 74HIt has two white bandsPrice by unitThe Shinko E240 tire combines a classic design with the latest generation materials and performanceThe strong composite the four-layer nylon housing are an ideal combination to achieve high mileageThe Shinko E240 tire has a universal design that can be used in the front or rearDouble white band for this classic style tire
NEUMATIC SHINKO E240 CLASSIC MT90 H 16 74H WHITE BAND
The Shinko E240 tire has a universal design that can be used in the front or rearIt has H classification for speeds up to 130 mph (210 km / h)Tube style tires should be used with air chambersThe Shinko E240 tire combines a classic design with the latest generation materials and performanceThe strong composite the four-layer nylon housing are an ideal combination to achieve high mileageMeasurement MT90 H 16 74HHave a white side bandPrice by unitWhite band and classic style for a last generation tire
CHARGER PLUG FOR PROCHARGER
Valid plug cable for Procharger 600, 1000 and 4000 loaders and maintainers.Valid to charge the battery through the base of the vehicle (Valid for motorcycle models that allow this option)It has a fast Procharger connector and an adapter cover, suitable for large Euro- / cigarette lighters or small DIN sockets.The cable measures 400mm in length.Includes fuse holder with fuse.With this Plug cable for Procharger chargers you can put your bike to charge faster.
NEUMATIC SHINKO E240 CLASSIC MT90 H 16 74H
The Shinko E240 tire combines a classic design with the latest generation materials and performanceThe strong composite the four-layer nylon housing are an ideal combination to achieve high mileageThe Shinko E240 tire has a universal design that can be used in the front or rearIt has H classification for speeds up to 130 mph (210 km / h)Tube style tires should be used with air chambersMeasurement MT90 H 16 74HPrice by unitA styloclasico tire with last generation components
PROCHARGER 4.000 BATTERY CHARGER
Material holding magazine manufactured by Procharger model 4.000Diagnostic and maintenance device.This charger is the first option for vehicles with Can Bus system, which charges the batteries completely automatically through the vehicle's plugs that are directly connected to the battery.A charging current of up to 4000 mA guarantees a fast charging process for 12 V starter batteries for motorcycles, scooters and cars.Special programs for charging Li-ion and AGM.Characteristics:Automatic load current adaptation (multistage I / U load characteristic.Suitable for 12 V lead-acid, lead-gel, lead-fleece (AGM), calcium, pure lead and Li-ion starting batteries.Battery test function.Desulphating function.Regeneration function for deeply discharged batteries.Charging program for cold ambient temperatures or AGM batteries.Drip loading function and overload protection (ideal for winter storage).Protects inverted polarity, short circuit proof and spark proof.Convenient charging compatible with the CAN bus using the vehicle socket, even on motorcycles with CAN bus technology.Includes charger, clip charging cable, ring terminal cable and instructions for use.The optional wall bracket shown is not included.This battery charger Procharger 4000 is perfect to have your bike always ready.
PROCHARGER 1.000 BATTERY CHARGER
Maintainer of material manufactured by Procharger model 1.000.Diagnostic and maintenance device.It is compact and universal, charges the starting battery of your motorcycle in an instant thanks to the maximum load current of 1000 mA.It also regenerates the battery if it is in bad condition.Suitable for motorcycles, scooters and cars of 6 V or 12 V.Its characteristics are the following:Automatic load current adaptation (load characteristic I / U)Valid for 6 V / 12 V batteries of lead-acid, lead-gel, lead-fleece (AGM), calcium and pure lead.Battery test functionDesulphating functionRegeneration for deeply discharged batteriesDrip loading function and overload protection (ideal for winter storage).Protects inverted polarity, short circuit proof and spark proof.Includes charger, clip charging cable, ring terminal cable and instructions for use.This Battery Procharger 1000 battery charger is perfect to have your bike always ready to go.
TRW BRAKE FLUID DOT 4 GRAND PRIX
Brake fluid DOT 4 of TRW model Grand Prix.It contains 1 liter.The dry boiling point is about 300 ° C and the wet boiling point is about 195 ° C.Remember that the brake fluid corrodes the paint and elements of the plastic fairing.The DOT 4 TRW Grand Prix brake fluid is specially developed to meet the increased safety requirements.
CONCHO 6 SET HIGHWAY 1
Set of 6 conchos manufactured by Highway 1.Silver conchos3 cm in diameter.The pack includes 6 conchos.This set of 6 Highway 1 conchos will look perfect on your leather or pannier clothes.
HIGHWAY 1 TOOL BAG
Bufalo skin roller manufactured by Highway 1.This roller is robust with a capacity of 3 liters.Manufactured in Bufalo leather.Perfect for storing tools and other useful items.It has straps to facilitate the attachment to the motorcycle.Measures: 24 x 17 x 8 cm.It is always a good idea to take with you a travel tool kit on your motorcycle so this Bufalo Highway 1 skin roller.
FRONT BEARING KIT HONDA KAWASAKI VN2000 04-09
The bearings are manufactured with a precision level of ABEC 3Triple lip rubber seals keep grease in and water and dirt out.The Chevron SRI 2 grease that contains it will protect it from oxidation (-29 ° C to 177 ° C (-20 ° F to 350 ° F))Double lip type CT seals with stainless steel springsPrice per kitValid for:KAWASAKI VN2000 2004 KAWASAKI VN2000 A/F 2006-2009 KAWASAKI VN2000 LIMITED 2005For front wheel.Made in the USA
FRONT BEARING KIT HONDA KAWASAKI VN1700 09-16
The bearings are manufactured with a precision level of ABEC 3Triple lip rubber seals keep grease in and water and dirt out.The Chevron SRI 2 grease that contains it will protect it from oxidation (-29 ° C to 177 ° C (-20 ° F to 350 ° F))Double lip type CT seals with stainless steel springsPrice per kitValid for:KAWASAKI VN1700 2009-2016 (TODOS LOS MODELOS)For front wheel.Made in the USA
FRONT BEARING KIT HONDA KAWASAKI VN1600 03-08
The bearings are manufactured with a precision level of ABEC 3Triple lip rubber seals keep grease in and water and dirt out.The Chevron SRI 2 grease that contains it will protect it from oxidation (-29 ° C to 177 ° C (-20 ° F to 350 ° F))Double lip type CT seals with stainless steel springsPrice per kitValid for:KAWASAKI VN1600 CLASSIC 2003-2008 KAWASAKI VN1600 MEAN STREAK 2004-2008 KAWASAKI VN1600 NOMAD 2005-2008For front wheel.Made in the USA
FRONT BEARING KIT HONDA KAWASAKI VN1500 96-08
The bearings are manufactured with a precision level of ABEC 3Triple lip rubber seals keep grease in and water and dirt out.The Chevron SRI 2 grease that contains it will protect it from oxidation (-29 ° C to 177 ° C (-20 ° F to 350 ° F))Double lip type CT seals with stainless steel springsPrice per kitValid for:KAWASAKI VN1500 CLASSIC 2006-2008 KAWASAKI VN1500D 1996-1997 KAWASAKI VN1500D 2005 KAWASAKI VN1500E 1998-2004For front wheel.Made in the USA
FRONT BEARING KIT HONDA KAWASAKI VN800A VULCAN 95-05
The bearings are manufactured with a precision level of ABEC 3Triple lip rubber seals keep grease in and water and dirt out.The Chevron SRI 2 grease that contains it will protect it from oxidation (-29 ° C to 177 ° C (-20 ° F to 350 ° F))Double lip type CT seals with stainless steel springsPrice per kitValid for:KAWASAKI VN800A VULCAN 1995-2005For front wheel.Made in the USA
FRONT BEARING KIT HONDA KAWASAKI EN500 VULCAN 90-09
The bearings are manufactured with a precision level of ABEC 3Triple lip rubber seals keep grease in and water and dirt out.The Chevron SRI 2 grease that contains it will protect it from oxidation (-29 ° C to 177 ° C (-20 ° F to 350 ° F))Double lip type CT seals with stainless steel springsPrice per kitValid for:KAWASAKI EN500 VULCAN / LTD 1990-20009For front wheel.Made in the USA
ULTRA MINI MMB CHROME/BLACK OIL TERMOMETER
Ultra Mini MMB chromed / black oil thermometer.Measurement scale 50º to 150º.Chrome finish with black dial.With lighting.It works at 12v.Approximate measurements:- Diameter: 48 mm.- Height: 47 mm.NOTE: It does NOT include support, we have the specific support sold separately.Manufactured in GermanyUltra Mini MMB thermometer ideal to control the temperature of something as important as the motor oil of your motorcycle.
CHROMED MALTESE CROSS TAILLIGHT
Chromed Maltese Cross taillight.Approximate measurements: 4 1/4 "(10.8cm) wide x 4" (10.2cm) high x 2 "(5 cm) deep.Position light and brake light functions.NOTE: It doesn´t have license plate light.Price by unit.Ideal taillight in any type of preparation or customization.
SUPPORT SIMPLE DETAIL T&T
Black simple detail support manufactured by T & T.Black housing with screw cap.This support can be placed directly with the M8 screw or the handlebar with the included clamp.Clock and thermometer NOT included, you can see the clock valid for this support by clicking HERE or the thermometer by clicking HERE.Color blackWith this support simple detail T & T negrp you can put the clock or thermometer on your handlebar in sight.
DOUBLE BRACKET DETAIL T&T BLACK
Double black support for placement on the watch bar and thermometer. The housing can be fixed directly to a surface (M8 screw) or mounted on the handlebar (inches and metric) using the divisible clamp provided. Black color It is valid for 22 and 25.4 mm handlebars. You can see the valid clock for this support by clicking HERE and the thermometer by clicking HERE. With this black double T&T detail support you can give a different touch to your motorcycle.
ANALOG CLOCK T&T
Analog watch manufactured by T & T.It is of good quality with mineral glass and stainless steel.Battery included.Includes an adhesive pad.Measurements: 26mm in diameter and 7mm in height.WaterproofThe battery should only be changed by a watchmaker to ensure that the watch remains waterproof and to avoid damaging the case or glass.We have a matching thermometer that you can see by clicking HERE and individual or double supports that you can see by clicking HERE.This T & T analog watch with 26mm is perfect because it fits in the area of the marker of any motorcycle or car.
ANALOG THERMOMETER T&T
Analog thermometer manufactured by T & T.Housing made of stainless steel.Mark in a range of -20º C to + 50º C.Includes an adhesive pad.Measurements: 25mm in diameter and 7mm in height.Resistant to rainWe have a matching clock that you can see by clicking HERE and individual or double supports that you can see by clicking HERE.This analog thermometer T & T is perfect because it fits in the area of the marker of any motorcycle or car.
