ACCESORIOS PARA MOTOS YAMAHA
AIR AND FUEL MIXING INDICATOR KOSO MINI 4
Air and fuel mix indicator Koso mini 4 The Koso mini 4 air and fuel mixture indicator helps you get the most out of your engine Display range from 12.2 to 17.2 Backlit LCD display, easy to read It connects to any 12V system Sensor and mounting hardware included Measures 69.8 mm W x 34.4 mm L x 17.2 mm Al The indicator of air and fuel mixture Koso mini 4 will keep you informed at all times of the mix air and fuel of your motorcycle
LED FOG LIGHTS 11.5 CM BLACK
Black 11.5 cm led fog lights The performance of these lights far exceed those of the fog lights with light bulb: much better visibility and extreme durability Black 11.5 cm led fog lights compatible with most fog lamp housings They are sold in pairs Approved Diameter 11.5 cm. (4.5 ") With these black 11.5 cm led fog lights you will have an extra light on your motorbike
HIGHSIDER STS-1 SEQUENTIAL LED INDICATORS
Intermittenes led sequential highsider sts-1 Valid for the front and back The highsider sts-1 sequential led indicators have a modern driving light system. LED technology with many unicellular sources makes this possible. The flash frequency runs from the inside to the outer side and creates a windshield wiper effect Dimensions: Width A: 68 mmWidth with stem B: 82 mmHeight C: 20 mmDepth D: 23 mmThreaded screw: M8 Connections: Yellow wire = turn signal (+)Black wire = earth (-) Price per psreja APPROVED The highsider sts-1 sequential LED intermitters include last generation sequential led technology
REAR PILOT BLACK LED SMOKE LENS
Rear light black led smoked lens The rear pilot black led smoked lens has the following measurements: Width: 61 mmHeight: 14 mmDepth: 32 mm. Made of aluminum Includes 2 lighting units, each with 4 powerful LEDs that ensure excellent brightness When the hexagonal screw of M3 is loosened, the angle of the rod can be adjusted within 30 degrees Cable assignment: Yellow = running light (+)Red = brake light (+)Black = earth (-) Sold per unit Does not include license plate light Note: The rear light can only be installed in vertical position It has European homologation The rear light black led smoked lens has a modern style and a lighting of last generation led
REAR PILOT BLACK LED RED LENS
Rear light black led red lens Housing made of high quality CNC aluminum and modern design Includes 2 lighting units, each with 4 powerful LEDs that ensure excellent brightness The rear light can only be installed in vertical position When the hexagonal screw of M3 is loosened, the angle of the rod can be adjusted within 30 degrees The rear light black led red lens has the following dimensions: Width: 61 mmHeight: 14 mmDepth: 32 mm. Cable assignment:Yellow = running light (+)Red = brake light (+)Black = earth (-) Sold per unit Does not include license plate light It has European homologation With the rear light black led red lens you will change the rear of your bike
SCREWS M6 x 20 MM DECORATIVE SKULL
Screws M6 x 20 mm decorative skull available in several finishes.Skull decorative screws are an excellent way to add a spooky look.Great detail with resistant screw mounting. Characteristics:Material: tin alloyDimensions (WxHxD): 27 mm x 30 mm x 54 mmWeight: 89 gM6 x 20 mmThey are sold in pairs.Available in black, brass and chrome.Mount on a surface strong enough.You can fix them to a metal lid, wood, etc.Screws M6 x 20 mm decorative skull available in several finishes with an incredible design.
SELF-ADHESIVE CHROME SKULL
Chromed self-adhesive skull of great design. Made of zinc alloy. Sold per unit. Suitable for flat surfaces (not curved). Self-adhesive chromed skull with two available sizes: Little: Dimensions (width x height): 29 x 45 mm Big: Dimensions (width x height): 45 x 67 mm Self-adhesive chromed skull to give a spectacular touch to your motorcycle.
UNIVERSAL GASOLINE FILTER K & N
Universal gas filter K & N Universal K & N gasoline filter can be used with a 5/16 "or 3/8" fuel line. This clear online vision filter features a glass body for a clear and quick view of any debris trapped in the white mesh. This kit was designed for non-injected fuel applications. Transparent housing for easy viewing Filter up to 40 microns Price by unit. The universal K & N gas filter has great quality
DEPOSIT LIQUID BRAKE OR CLUTCH UNIVERSAL ANODIZED BLACK
Liquid tank brake or universal clutch black anodized Manufactured in CNC machined aluminum in natural finishIncludes rubber diaphragm, universal support and hydraulic linePrice by unit The black anodized universal brake or clutch liquid tank is universal and will require modifications for its installation Great quality and finish for this black anodized universal brake or clutch liquid tank
DEPOSIT LIQUID BRAKE OR CLUTCH UNIVERSAL ALUMINUM
Liquid tank brake or aluminum universal clutch Universal aluminum brake or clutch liquid tank made of CNC machined aluminum in natural finish Includes rubber diaphragm, universal support and hydraulic line Price by unit Perfect for any modification this aluminum brake or universal aluminum clutch tank has an excellent quality
MULTIFUNCTION MARKER KOSO TNT-04
Multifunction marker koso TNT-04 quality. Quick reading of almost all key screens at a glance: Analog tachometer and digital display of engine temperature, fuel level, voltmeter with warning function, speed indicator, time and warning lights. Multi-function marker koso TNT-04 with which you can choose your own color for backlighting. Dimensions: Outer ring: 94.7 mm in diameter Height: 55.8 mm The fixing holes are approx. 71.4 mm difference Note: Installation requires expert knowledge of the vehicle's electricity. Marker multifunction koso TNT-04 incredibly well designed and quality.
KOSO COIN TEMPERATURE MARKER
Koso Coin quality temperature marker. Temperature indicator with temperature warning function. Characteristics: Temperature display range: 0 ° C - 120 ° C (or 32 ° F - 248 ° F)Selectable display units: 1 ° C or 1 ° FTemperature warning: when the temperature rises above 120 ° C (or 248 ° F), the temperature indicator starts blinking.Power supply: 12 V electrical systemComplies with: JIS D 0203 S2Screen color: redSize (W x H x H): Day 40 mm x 11 mmKoso Coin temperature marker with a weight of 30 gTemperature sensor: BF030125 1/8 (BSP) x 28Koso Coin temperature marker to control the temperature of your motorcycle at all times.
CHROME RIOT GRIPS 25.4MM
Riot chrome grips for 25.4mm (1 ") handlebarsThey have an MX style with a slim profile and a soft and durable rubber compound that together provide total comfort.The cast aluminum housings with an aggressive design offer a resistant style from all angles and provide a unique look on your bike.Original reference: 3584EPDM Premium rubber compound eliminates vibration and provides a secure gripAluminum ringsIf you want to change the aesthetics of your handlebar completely and gain comfort and convenience, do not hesitate to purchase these wonderful riot chrome cuffs 25.4mm
ROLLER SKIN LONGRIDE WITH BELTS KHAKI
Longride skin roller with Khaki straps made of high quality waxed cotton.Longride skin roller with Khaki straps with leather straps.Dimensions open: 35x25 cm.Longride skin roller with elegant design Khaki straps perfect for short trips.
BLACK THERMAL SHIELD 2 1/4 "" X 10"
Black thermal shield 2 1/4 "" X 10 "made with quality materials that will give a unique touch to the collectors of your motorcycle.This black thermal shield can be used on all 2 1/4 "exhausts.Length 10 "(25.4 cm.)Finished in black.Price by unit.Black thermal shield 2 1/4 "" X 10 "easy to assemble, in a few moments you will change the color to the collectors and you will give a cleaner look.
BLACK THERMAL SHIELD 2 1/4 "" X 7"
Black thermal shield 2 1/4 "" X 7 "fde great quality will change the look of your collectors completely.This black thermal shield can be used on all 2 1/4 "exhausts.Length 7 "(17.78 cm.)Finished in black.Easy to installPrice by unit.Your collectors are damaged by the passage of time? Easy solution with this black thermal shield 2 1/4 "" X 7 ".
BLACK THERMAL SHIELD 2 1/4 "" X 10.16 CM. LONG
Thermal shield black 2 1/4 "" X 10.16 cm. Made with the highest quality materials.This black thermal shield can be used on all 2 1/4 "exhausts.Length 4 "(10.16 cm.)Easy to installPrice by unit.No doubt if your collectors are blue or you want to change their appearance, install this black thermal shield 2 1/4 "" X 10.16 cm and finish with the problem.
COUNTERWEIGHT GILLES TOOLING (VARIOUS COLORS)
Counterweight Gilles Tooling (Various colors) of great design. Material: hard anodized. CNC machining from solid aluminum. Counterweight Gilles Tooling (Various colors) including installation kit for practically all types of handlebars, from 12 mm to 22 mm inside diameter. Weight without internal components: 28 g (each) The weight of the end of the bar protrudes 26 mm from the end of the handlebar. Sale by pairs. These counterweights are not compatible with imperial hand bars or Kawasaki hand bars with M8 thread. Counterweight Gilles Tooling (Various colors) that simply look great on your handlebar! Especially closed screw head covers are very attractive.
POSITION LIGHT AND BRAKE LED KELLERMAN ATTO RB HM BLACK
Position light and brake Atto RB HM black manufactured by Kellerman. Kellermann HighPower LED technology 12V 1W / 1W Long Life Protection Guard, controlled by IC, 330 kHz position light and brake led Kellerman Atto RB HM black compatible with 12 V DC electrical systems M5 x 0.5 x 6.5 fastening thread. Small size, barely bigger than a penny. APPROVED Includes position and brake light but does not include license plate light. Be sure to align the fixing horizontally. If it is vertical make sure you have the correct attachment for your motorcycle. Sold per unit. Position light and brake led Kellerman Atto RB HM black can be installed as a pair, symmetrically in relation to the midline of the motorcycle, as well as centrally as a single light in the rear.
POSITIONING LIGHT AND BRAKE LED KELLERMAN ATTO RB HM CHROME
Position light and brake led Kellerman Atto RB HM quality chrome. With the position light and brake led Kellerman Atto RB HM chromed can be operated directly from the 12 V electrical system. characteristics: Kellermann HighPower LED technologyLong Life Protection Guard, controlled by IC, 330 kHzHigh quality chrome metal housing12V 1W / 1WCompatible with 12 V DC electrical systemsM5 x 0.5 x 6.5 fastening threadE-approvedDuring installation, be sure to align the fixing horizontally. If your vehicle only allows vertical fixing, make sure you have the correct attachment for your motorcycle! Note: it does not include license plate light. Price by unit. Position and brake light Led Kellerman Atto RB HM chromed just larger than a 1 cent coin and probably the smallest position and brake light that have been manufactured for a motorcycle and have the official approval of TÜV.
FAST CONNECTOR 4 POLES STAIN
4-pin waterproof quick connector that complies with IEC 529 and DIN 40050 IP 67 specifications. Water resistance IP 67 Manufactured by Baas. 4-pole waterproof quick connector with cable section 1.5. Temperature range: -40 ° C to + 125 ° C Max. 14 TO Max. 24V DC 4-pole waterproof quick connector, reliable and resistant.
OJ SILVER MOTORCYCLE CASE
OJ silver motorcycle case. The OJ silver motorcycle case has the following sizes:M: 203 x 89 x 119 cmL: 229 x 99 x 125 cmXL: 246 x 104 x 127 cm Made of polyester with thermally welded seams. Anti-slip strap. It incorporates a padlock eyelet. Price by unit. A simple way to protect your bike is the silver OJ motorcycle case.
GILLES TOOLING COUNTERWEIGHT
Counterweight Gilles Tooling quality. Manufactured in hard anodized, aluminum machined by CNC. Includes installation kit for virtually all types of handlebars, from 12 mm to 22 mm inside diameter. Gilles Tooling counterweights with closed screw head cover. Available in various colors. The weight of the end of the bar protrudes 26 mm from the end of the handlebar. Weight without internal components: 28 g (each) They are sold by pair.Note: they are not compatible with imperial hand bars or Kawasaki hand bars with M8 thread. Gilles Tooling counterweights that not only look good on your motorcycle, but also help reduce the vibration of the handlebars, which means greater driving comfort!
OJ BLACK MOTORCYCLE CASE
Motorcycle cover OJ black.Waterproof black OJ motorcycle boot made of polyester with thermally welded seams. Anti-slip strap. The black OJ motorbike case incorporates a padlock eyelet. Sizes:M: 203 x 89 x 119 cmL: 229 x 99 x 125 cmXL: 246 x 104 x 127 cm Price by unit. The black OJ motorcycle cover will be perfect to protect your motorcycle.
FAST CONNECTOR 3 POLES STAIN
Quick connector tight 3-pole quality. Quick connector tight 3 poles that meets the specifications IEC 529 and DIN 40050 IP 67. This connector is characterized by IP 67 water resistance and 1.5 cable section. Its temperature range is: -40 ° C to + 125 ° C Max. 24V DC Max. 14 TO The Baas 3-pole quick connector from Baas complies with the most stringent requirements in terms of water resistance and reliability.
SADDLEMEN MAGNETIC BAG FOR GPS OR TELEPHONE
Magnetic bag saddlemen for gps or telephone. Perfect to carry your smartphone, GPS or other electronic device on your motorcycle. Powerful magnets keep this weatherproof case securely attached to any metallic fuel tank (shielded magnets to avoid any interference with electronic devices). The large plastic window transfers the electrostatic energy so that you can use the touch screen of your device. The saddlemen magnetic bag for gps or telephone has a material finished in rubber to protect your motorcycle. Large perimeter zippers for easy access to the device. 12.5 cm A x 89 mm L x 19 mm H (5 "x 31/2" x 3/4 ") compartment with removable foam and foam cover that can be trimmed to fit your device precisely. Now you can take your mobile device on your motorcycle with this practical saddlemen magnetic bag for gps or phone.
MAGNETIC TELEPHONE BAG FOR GPS
Bag for gps or magnetic phone. Bag for gps or waterproof magnetic phone with zipper to transport your phone / MP3 / GPS and which is fixed magnetically to metallic gas tanks. With transparent plastic window compatible with touch screens. For phones, MP3 and GPS devices up to 10 cm (4 ") wide and 15 cm (6") high. Soft cushioned surface that leaves no marks on the paint in the fuel tank. A simple solution to carry your mobile or gps is this bag for gps or magnetic phone.
ANDERSON GRIPS 25.4 MM GLITTER YELLOW
Anderson 25.4 mm yellow glitter cuffs will give your motorcycle a unique aesthetic.Measure: 25.4 mm.Yellow color.With metalflake.Anderson 25.4 mm yellow glitter cuffs valid for any motorcycle that installs 1 "(25.4mm) cuffs.Price per couple.Eye-catching color for your boring cuffs of origin, installs easily these anderson 25.4 mm yellow glitter cuffs.
ANDERSON GRIPS 25.4 MM GLITTER BLUE
Anderson fists 25.4 mm blue glitter perfect to customize your motorcycle to your liking.Measure: 25.4 mm.Color blue.With metalflake.Anderson 25.4 mm blue glitter cuffs valid for any motorcycle that installs original 1 "(25.4mm) cuffsPrice per couple.Completely change the aesthetics of your motorcycle with these anderson 25.4 mm blue glitter cuffs.
ORANGE ANTICALORIC TAPE WITH BLACK FLANGES 51 MM X 7.6 M
Orange anti-heat tape with black flanges 51 mm X 7.6 m. The orange anti-heat tape with black flanges 51 mm X 7.6 m. It has the following characteristics. Withstands temperatures up to 1093 ° C (2000 ° F).Measure: 51 mm X 7.6 m.Orange.Includes 4 black metal flanges.Product manufactured by Cycle Performance Prod. Perfect to embellish your escapes and avoid burns, the orange anti-heat tape with black flanges 51 mm X 7.6 m. It will change the aesthetics of your motorcycle.
